View VZM-2780C2_4762826.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CPI 500W M-Band TWT Amplifier for Instrumentation Applications
M - Band
The VZM-2780C2 500 watt TWT High Power Amplifier features high efficiency, small size and an integral computer interface.
M-Band
Compact
Safety 500W TWT High Power Amplifier
Provides 500 watts of power in the 8.0 to 18.0 GHz frequency band in a compact 19inch rack-mount dual drawer configuration for wideband testing.
Efficient and Reliable
Conforms to international safety and EMC compliance standards.
Easy to Maintain
Modular design provides for easy installation and maintainability in the field.
Worldwide Support
Employs CPI dual-depressed collector helix traveling wave tubes, increasing efficiency by a nominal 20% over conventional single collector TWTs, and a power supply designed with a minimum number of parts for maximum uptime.
Simple to Operate
Backed by over two decades of satellite communications experience, and CPI's worldwide 24-hour customer support network that includes fifteen regional factory service centers.
Integrated microprocessor control lets the user adjust and monitor all operating parameters from one easy-to-read local or remote panel, using straightforward menu-driven commands. Includes a built-in interface and serial bus for operation from the station computer.
45 River Drive Georgetown, Ontario, Canada L7G 2J4 tel: +1 (905) 877-0161 fax: +1 (905) 877-5327 e-mail: marketing@cmp.cpii.com www.cpii.com/satcom
M -B a n d
SPECIFICATIONS, VZM-2780C2
Electrical
Frequency TWT Model Number Output Power TWT Flange Bandwidth Gain RF Level Adjust Output Power Adjustability Gain Stability (typical) Small Signal Gain Slope Small Signal Gain Variation (typical) Input/Output VSWR Load VSWR Residual AM 8.0 to 18.0 GHz VTM6392M4B Relative Humidity 280 W min. (each) 500 W min. 10.0 GHz 57 dB min. at rated power output; 57 dB typ. at small signal 0 to 20 dB continuous 0.1 dB 0.25 dB/24 hr max. (at constant drive and temp.) 0.02 dB/MHz max. 10.0 dB pk-pk max. over the 10 GHz bandwidth 1.25:1 max. 2.0:1 max. for full spec compliance; any value without damage -45 dBc up to 4 kHz; -20 [1.25 + log F (kHz)] dBc, 4 kHz to 500 kHz (F in kHz); -80 dBc above 500 kHz -6 dBc typ. at 8 GHz 208/120 V 10%, or 380-415/220-240 V 10%, 47-63 Hz; 5 wires are: Phase 1, 2 & 3, neutral and ground connection. Neutral (wire 5 can be used if available) 0.90 min. (at 50 Hz) 6.9 kVA typ. 7.5 kVA max. RF Input Connection RF Output Connection RF Power Monitors Dimensions (W x H x D) RF Drawer Power Supply Weight RF Drawer Power Supply Interconnect Altitude Shock and Vibration Acoustic Noise
Environmental (Operating)
Ambient Temperature -10 to +40C operating -20 to +70C non-operating 95% non-condensing Up to 10,000 ft (3000 m) with standard adiabatic derating of 2/1000 ft. Designed to meet conditions normally encountered in the laboratory 72 dBA one meter from front panel
OPTIONS & C O M PA N I O N PRODUCTS: * Mimic Remote Control Panel
Mechanical
Cooling (TWT) Forced air with integral blower and power supply fan. Maximum external pressure loss allowable: 0.25 inch water gauge. Type N female Type WRD-750 Type-N female 19 x 17.5 x 28 in. (483 x 445 x 711 mm) 19 x 8.75 x 24 in. (483 x 223 x 610 mm) 90 lbs (41 kg) 100 lbs (45 kg) 10 lbs (4.5 kg)
Harmonic Content Primary Power 3 phase, 5 wire
Power Factor Power Consumption
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 205, ISSUE 1 06/07 PDF

▲Up To Search▲

Price & Availability of VZM-2780C2

	To Download VZM-2780C2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .